github

Made bySaurav Hathi

ECE - Practice Test - 69

Q1:

A parallel plate lossless transmission line consists of brass strips of width W and separated by a distance d. If both w and d are doubled then its characteristics impedance will

Tags:
PlaceMe2_EMFT4
Baseline3_3rdYear_EIE
Section:
Electromagnetics (EMFT)
Options:
Q2:

A transmission line has a characteristic impedance of 50Ωand a resistance of 0.1Ω/m. If the line is distortion less, the attenuation constant (in Np/m) is

Tags:
PlaceMe2_EMFT4
Section:
Electromagnetics (EMFT)
Options:
Q3:

A lossless transmission line of length 50cm with L = 10µH/m, C = 40 pF/m is operated at 30 MHz. What is its electric length(βl)?

Tags:
PlaceMe2_EMFT4
Section:
Electromagnetics (EMFT)
Options:
Q4:

In the relation S=1+|γ|1−|γ|;the values of S and γ, respectively, vary as

Tags:
PlaceMe2_EMFT4
Baseline2_ECE_3Yr_DSCSDEC
Section:
Electromagnetics (EMFT)
Options:
Q5:

A transmission line operating at a frequency 6x108rad/shas parameters

R'=0.2 kΩ/m,  L'=4μH/m,  G'=8μs/m,  C'=4pF/m.

The propagation constant, γ will be:

Tags:
PlaceMe2_EMFT4
Baseline3_3rdYear_EIE
Section:
Electromagnetics (EMFT)
Options:
Q6:

At an operating frequency of 500Hz, length of a transmission line is given by l=λ4. For the same transmission line the length at 1KHz will be given by

Tags:
Honeywell_NEAT_ECE
PlaceMe2_EMFT4
Section:
Electromagnetics (EMFT)
Options:
Q7:

The space between the strips of a parallel plate transmission line is filled of a dielectric of permittivity, εr = 1.3 and conductivity σ=0, If the width of the strips is 9.6cm and the separation between them is 0.6cm and the parameters G’ and C’ will be respectively:

Tags:
PlaceMe2_EMFT4
Section:
Electromagnetics (EMFT)
Options:
Q8:

The depth of penetration of electromagnetic wave in a medium having conduety σat a frequency of 1 MHz in 25cm. the depth of penetration at a frequency of 4MHz will be

Tags:
PlaceMe2_EMFT4
Section:
Electromagnetics (EMFT)
Options:
Q9:

A transmission line is operating at wavelength `λ`.If the distance between successive voltage minimum is 10cm and distance between load and first voltage minimum is 7.5cm. Then the distance between load and first voltage maxima is

Tags:
PlaceMe2_EMFT4
Section:
Electromagnetics (EMFT)
Options:
Q10:

A lossless transmission line operating at 4.5 GHz has L = 2.6 µH/m and Z0 = 80ΩThe phase constant βand phase velocity V→is

Tags:
PlaceMe2_EMFT4
Section:
Electromagnetics (EMFT)
Options:
Q11:

For a short circuit coaxial transmission line characteristic impedance Z0=35+j49Ωpropagation constantγ=1.4+j5 m−1, length of line l = 0.4m. The input impedance of short circuit line is

Tags:
PlaceMe2_EMFT4
Section:
Electromagnetics (EMFT)
Options:
Q12:

If reflection coefficient for voltage be 0.6, the voltage standing wave ratio (VSWR) is

Tags:
PlaceMe2_EMFT4
Section:
Electromagnetics (EMFT)
Options:
Q13:

If the maximum and minimum voltage on a transmission line are 4V and 2V, respectively for a typical load, VSWR is

Tags:
PlaceMe2_EMFT4
Section:
Electromagnetics (EMFT)
Options:
Q14:

When a lossless transmission line is terminated by a resistance equal to surge impedance then what is value of the reflection coefficient?

Tags:
PlaceMe2_EMFT4
Section:
Electromagnetics (EMFT)
Options:
Q15:

A lossless transmission line operating at 4.5 GHz has L=2.6 μH/mand Z0=80Ω.The phase constant βand phase velocity V→is

Tags:
PlaceMe2_EMFT4
Section:
Electromagnetics (EMFT)
Options: